6 Recommended Car Seat for Jeep Wrangler In 2024

Most Jeep cars are designed with shallow seat backs and limited space between the vehicle’s seat cushions.

This can make it difficult to fit a regular car seat in a Jeep Wrangler.

But, Graco Slimfit3 LX, Graco Extend2fit, and Chicco Keyfit 30 are a few car seats that are compact and suitable for Jeep Wrangler cars.

Here are 6 of the best car seat options available for your Jeep Wrangler

Compact Car Seats for Your Jeep Wangler

Our best car seats for jeep wrangler cars

• Graco Extend2Fit (Best snug car seat for Jeep Wrangler )
• Graco SlimFit3 LX (Best car seat for 3 across for Jeep Wrangler)
• Britax Boulevard Clicktight (Best Premium car seat for Jeep Wrangler)
• Graco 4Ever 4 in-1 (Best comfortable car seat for Jeep Wrangler)
• Graco Grows4Me 4-in-1 (Best all-in-one car seat for Jeep Wrangler)
• Chicco Keyfit 30 (Best infant car seat for Jeep Wrangler) 

6 Best Car Seats for jeep wrangler

All the car seats in this review can fit in a jeep wrangler car (4 doors).

The car seat fit and positioning will be slightly different from one car seat to another, but they all have been tried and tested with a Jeep Wrangler (2013-2018).

Best Overall

Extend2Fit Convertible Car Seat

• Rear-facing: 4-50 pounds, 1 inch
• Forward facing: 22-65 lbs, under 49 inches
• Car seat dimensions: W19.5 in x H23.5 in x D21.5 in
• Car seat Weight: 19 lb
• Overhand allowed: 20%

Graco Extend2fit is highly recommended by most CPTS for tight cars like the Jeep Wrangler because it is one of the most compact car seats front to back. 

This car seat is highly adjustable and includes a ten-position headrest, six recline positions, and an extendable footboard that can give your child 5 extra inches f legroom allowing your child to safely rear-face longer. 

However, you may not be able to fully benefit from the foot extender in the Jeep Wrangler due to a space issue. 

The rear-facing position is generally considered safer for children up to four. And Extend2fit has a 50 pounds rearing-facing weight limit.

While the seat cover takes some time and searching to remove, it is machine-washable. This makes cleaning the car seat much easier.

Also, the harness storage pockets are also nice for tucking away the parts you aren’t using.

This Extend2Fit is however a little wide for a Jeep Wrangler, so it may not fit 3 across.

Good to know: The new version of the Extend2fit which is the Extend2fit 3-in-1 can convert to a high-backed booster. So, you may wanna consider this model if you prefer long-lasting car seats.

---

Best for 3 across

Graco SlimFit3 LX 3-in-1

• Rear-facing: 5-40 pounds, 1″ below the handle 
• Forward facing: 22-65 pounds, Up to 49 inches 
• High back booster: 40-100 pounds, 43-57 inches tall
• Car seat dimensions (Width, Height, Depth): 16.7 in, 24.5 in, 20.7 in
• Car seat weight: 19.2 pounds
• Overhand allowed: 20%

The Graco Slimfit3 LX, also known as the True3Fit LX is a multimode car seat with rear-facing, forward-facing, and booster-use capabilities. 

The SlimFit3 LX is super slim side to side and pretty compact front to back. It is a narrow car seat that can fit nicely in your jeep wrangler saving space in your back seat.

It is also one of the few car seats that can fit in a 3 across a situation in a Jeep Wrangler or other narrow car with multiple configurations (using other Graco car seats and several other brands).

The Slimfit3 LX has 10 headrest positions and 4 recline settings. Each one is for a specific mode of use. Refer to the car seat manual during installation for a proper recline setup.

The low sides of this car seat make loading a toddler a breeze. Also, the mesh fabric (airflow channels) on the sides keeps it very cool and airy for your child. 

When it comes to car seat cleaning, the Graco seat has removable covers that are machine washable. 

Unlike the Extend2fit, Graco Slimfit3 cup holders are optional which helps make use of the limited space in your Jeep Wrangler. 

Good to know: Though they may share part of their names, the SlimFit3 LX is not to be confused with the Graco SlimFit.

---

Best for Infants & Newborns

Chicco Keyfit 30

• Rear-facing: 4-30 pounds, 1 to 30 inches
• Car seat dimensions (L x W x H): 27.5″ x 16.5″ x 24″
• Seat weight: Carrier – 9.5 lbs / Base – 7 lbs
• Overhang allowed: 20%

If you need an infant car seat to install in a Jeep Wrangler, the Chicco Keyfit 30 is one to consider.

This car seat is very easy to install in the Jeep Wrangler. You can use both LATCH and seatbelt install. 

The seatbelt installation is not as easy and straightforward as using the LATCH system but it’s still something that all parents can manage. 

Another advantage of using the Chicco Keyfit 30 is the super easy seatbelt lockoff. 

You can also choose to install the Chicco Keyfit 30 with or without the base. Th baseless install is great when traveling or flying with the car seat. 

Chicco allows the 20% overhang when installing their car seats, this gives you an installation advantage with the Wrangler shallow back seats. 

Several parents reported that the smooth undersides of the car seat help protect the seats of their car.

---

Best 4-in-1

Graco 4Ever DLX 4-in-1

• Rear-facing: 4-40 pounds, Until the child’s head, is 1 inch below the handle
• Forward facing: 22-65 pounds, less than 49 inches tall
• High-back booster: 30-100 pounds, 38-57 inches tall 
• Backless booster: 40-120 pounds, 40-57 inches tall
• Car seat dimensions: Width 21.5, Height 24 in, Depth 20 in
• Product Weight: 23 pounds
• Overhang allowed: 20%

Graco 4Ever DLX 4 in 1 is another available choice for a Jeep Wrangler. In rear-facing mode, the 4Ever is compact enough to fit in small cars.

This car seat is intended to be used for all the car seat stages: rear-facing, front-facing, high-backed booster, and booster. And it does a good job of that. 

Graco 4ever features an extendable headrest that you can pull out as your child grows in the car seat.

With the Graco, you can choose between the seatbelt or the LATCH installation system and has 6 recline positions.  Positions 1, 2, and 3 are for rear-facing mode. Positions 4, 5, and 6 are for forward-facing mode.

Another thing we like about this seat is the smooth bottom that’s designed to minimize the pressure marks put on car seats from a tight install.

Plus, Graco 4ever DLX 4-in-1 is relatively cheap for what you get as you it can be the only seat you ever need.

---

Graco Grows4Me 4-in-1 convertible car seat

• Rear-facing: 5-40 lbs, child’s head is 1” below the gray adjustment handle
• Forward-facing: 22-65 lbs., 49” or less
• Highback booster: 40-100 lbs., 43-57”, at least 4 years old
• Backless booster: 40-110 lbs., 43-57”, at least 4 years old
• Car seat dimensions: Width 21.5 in, Height:24 in, Depth:20 in
• Shell height with headrest: 30”
• Car seat depth: 13”
• Seat weight: 22.5 lbs ( with padding)

Graco Crows4me 4 in 1 is another convertible car seat you can use in your Jeep Wrangler. This Graco car seat is somehow similar in features to the previously mentioned 4Ever model. 

Grows4Me is a long-lasting car seat that will accommodate your child for many years. You can use it rear-facing, forward-facing, backed booster, and backless booster as well.  

has 1 cupholder and fewer padding options compared to the 4Ever. 

In this car seat, you get an adjustable base with 3 rear-facing recline positions, 3 forward-facing recline positions, and 1 booster recline position. 

The car seat cover can be easily removed and cleaned in the washing machine. 

---

Guide to Buying a car seat for a Jeep Wrangler

Still not sure which car seat to choose for your Jeep Wrangler? Refer to the Buyer’s Guide below to help point out the important features when shopping for a car seat.

1. Your child’s fit in the car seat

Before you decide what car seat fits in your Jeep Wrangler, you have to check your child’s measurements. All seats have different weight and height ranges for their best fit.

Depending on your child’s stats, there will be a few options for your Jeep Wrangler, including infant car seats, convertible car seats (rear-facing and forward-facing), high back boosters, and even no back boosters. 

Not sure which type of car seat is best for your child? Check our car seat stages guide. It will help you find the right fit for your child.

2. Car seat size and fit in your Jeep Wrangler

When choosing a car seat, car fit is really important, especially for a car like a Jeep Wrangler. 

Jeep’s back seats are very narrow and cannot accommodate all car seats in the market. 

These car seat recommendations are already tested and can fit in the Jeep Wrangler but if you have to go with another car seat, make sure to try it before you purchase it. 

Also, fitting 3 seats across in the Jeep Wrangler will be extremely difficult, but possible. 

If are have a big family and you need to fit 3 car seats in the back of your Wrangler, start with these car seat recommendations (definitely consider the Graco SlimFit3) and combine them with other narrow car seats in the market. 

It may not work on the first try. You have to try different configurations and placements before you find the correct fit in the Jeep. 

You don’t want the car seats to overlap each other, which is considered unsafe by most car manufacturers. 

When using an infant car seat, try Installing it without the base, this helps scoot it a little more toward the door and get more backseat room.

But if you still want to use the base (Makes total sense) keep in mind that most car manufacturers allow you to have a 20% or more overhang of the base which is good.

But, double-check this detail from your car seat manual.  

3. Ease of use

The Jeep Wrangler has latch anchors, making installation easier than some other cars. But keep in mind that when you are installing a car seat with LATCH anchors, your car seat needs to be within the weight limit of the anchors.

Other features like the ability to recline the car seat and adjust the headrest, to fit perfectly in your Jeep Wrangler are also something you want to pay attention to.

Also, look for a lightweight car seat with easy-to-use and adjustable straps and buckles since you might have to take the car seat in and out of the car several times.

4. Comfort and safety

All car seat manufacturers in the US offer safe and tested car seats but it won’t hurt to double-check if the car seat provides proper protection and comfort for your child.

Look for features like side impact protection and adjustable head support.

Also, look for a car seat with fabric made of breathable material and a 5-point harness system which is the best kind of safety harness.

5. Easy to clean

This may be the least of your worries but it is still worth considering.

Choose a car seat with a cover that can be easily taken off and thrown in the washing machine.

Here is how to safely clean your baby’s car seat

The Bottom Line

These car seat recommendations have been tested and recommended for use in the Jeep Wrangler.

If you decide to go with another car seat make sure you read reviews and check the specifications to ensure that it fits.

No matter what car seat you choose, it is always important to ensure that your car seat installation is done correctly.

Follow the car seat manual instructions, or work with a certified CPST to ensure your child is properly secured in the car seat.

FAQs